ATX-to-AT Conversion Cable Installation Instructions
Home > Support > ATX-to-AT Conversion Cable Installation Instructions
Installation
1. Turn off the computer. Disconnect the AC power supply and any other cables from the unit. Remove the cover from the computer chassis.
2. Plug the 20-pin connector on the adapter into the 20-pin connector of the ATX power supply.
3. Plug the two 6-pin AT motherboard connectors into the motherboard with all of the black wires together in the middle.
4. Plug the two long wires with spade connectors onto the case's ON/OFF switch with both of the wires on one side of the center divider.
5. Replace the computer cover.
If you have questions about this product, please contact PC Power & Cooling Customer Service at 1-800-722-6555 or 1-760-931-5700.
 |
TECHNOLOGY CORNERThe Tech Center provides a comprehensive power supply knowledge base that gives you clear and honest facts. more |
|
 |
SEE OUR FACILITYOn April 19,1985, PC Power & Cooling began operations in a small warehouse just outside of San Diego, CA. Founded by Doug Dodson. more |
