Turbo-Cool 1KW-SR Power Supply Installation Instructions

Home > Support > Turbo-Cool 1KW-SR Power Supply Installation Instructions

Power Supply Removal
1.  Unplug the power cord from the power supply receptacle.

2.  Remove the cover from the computer chassis.

3.  Disconnect the motherboard, drive and video connectors.

4.  Remove the 4 screws that secure the power supply to the chassis and slide the power supply out.

Power Supply Installation
1.  Position the power supply in the computer chassis and secure it with the screws provided.

2.  Attach the motherboard connectors according to figures 1 & 2.

3.  Attach the PCI Express video connectors according to figure 3.

4.  Attach the drive connectors to the peripherals according to figures 4, 5 and 6.

5.  Plug the 14 AWG power cord into the AC input.

CAUTION: Incorrect installation of the connectors could damage your PC.

Notes:
1.  The ON/OFF function of the power supply is controlled through the motherboard connector (Pins 16 and 17).
2.  The power supply requires a minimum load of 2A on the +5V output for proper regulation and operation. Most motherboards will meet this requirement.
3.  The four potentiometers are for Over Current Protection on the four +12V outputs. Please do not adjust.

CAUTION: UNDER NO CIRCUMSTANCES SHOULD THE POWER SUPPLY COVER BE OPENED. THERE ARE DANGEROUS HIGH VOLTAGES INSIDE. REFER ALL DIFFICULTIES TO PC POWER & COOLING, INC.

If you have questions about this product, please contact PC Power & Cooling Customer Service at 1-800-722-6555 or 1-760-931-5700.